Do you take multicookers in Sergeli-8 new kitchens?

Yes. Southern edge, new-build islands. We agree the estimate before the module.

The lid whistles — replace the heater at once?

No. Valve first. On Redmond and Polaris the heater follows diagnosis and a quote.

At the south edge, keep a new-build lid shut until we arrive?

Yes — keep the new-build lid shut until we arrive: the valve is easier to see that way. Do not force the pot.

How much does multicooker repair at home cost?

Typical jobs start from 100,000 UZS. The exact price depends on the fault and model. Heating element replacement from 150,000 UZS; control board repair from 120,000 UZS.

Can I book a technician for the same day?

Yes, if a slot is available. Share the model and symptoms — we'll estimate arrival time and bring the right tools.

What if the multicooker won't turn on or heat?

Check the outlet and power cord first. If that doesn't help — the control board, heating element, or temperature sensor may be at fault. The technician will check on site and explain the cause.

Multicooker repair at home in Sergeli-8

Home visitDiagnostics with repairWarranty on labor

Multicooker repair in Sergeli-8: a whistling pressure valve or a pot that will not seat on a new-kitchen plate — we check contact before quoting.

On Redmond and Polaris in southern new builds the lid valve whistles from move-in tilt more often than the heater opens.

Sergeli-8: we seat the pot on the island plate — heat contact cannot be tested without it.

from 100,000 UZS

Free diagnostics

Exact price after diagnostics. We agree on the estimate and parts needed before work starts.

Call a Master Message on Telegram

Arrival in 1-2 hours

Warranty included

Home repair

10+ years experience

Sergeli-8

Service Area

Visit time

Confirmed by phone

How to arrange a visit

Name Redmond, Polaris or Moulinex and the fault: valve whistle, pot will not seat, board ignores the new board socket
Remove the pot on a Sergeli-8 new-build island
Unplug the cord — in new kitchens the socket often sits in the island plinth

Call a Master

How the visit works

Pressure valve

Whistle under the lid — valve and latch after the move.

Pot seat

No plate contact — pot geometry on the new island.

Board supply

Silence on a live socket — control board after the cord check.

Heat & pressure

Issues We Fix

Heating and sensors

Not heating
Overheating
Display error
Burning smell

Power and controls

Not turning on
Buttons not working
Timer not working

Pressure cookers

Steam escaping from lid
Not holding pressure
Damaged housing

Brands We Service

Topic 1 / 3

Multicooker heating element replacement

If the multicooker turns on but won't heat, or heating is very weak — the heating element has likely failed. The technician removes the bowl, checks element resistance with a multimeter, inspects contacts and the temperature sensor. If needed, we replace the element with a compatible or original part.

Heating element replacement from 150,000 UZS depending on model. Work is done on site in 1–2 hours. We explain why the element failed (scale from water, voltage spike) and how to extend the appliance's life: don't pour cold water into a hot bowl, use a voltage stabilizer.

Multicooker control board repair

Won't turn on, display won't light, buttons don't respond, or an error code appears — the control board is often the cause. The technician checks the power supply, capacitors, processor, and button panel. Individual components (capacitors, resistors) can be soldered on site; a failed processor may need a full board swap.

Board repair from 120,000 UZS; board replacement from 200,000 UZS. We work with Redmond, Polaris, Philips — original and compatible boards. After repair, we test all modes and explain how to avoid a repeat: don't wash the board with water, use a voltage stabilizer.

Pressure valve and lid repair for pressure cookers

Steam escaping from the lid, pressure won't build, or the valve keeps hissing — the lid seal, pressure relief valve, or sensor may be at fault. The technician inspects the silicone seal for cracks and deformation, checks the valve for blockages and spring, and tests the pressure sensor.

Seal replacement from 80,000 UZS; valve from 100,000 UZS; pressure sensor from 120,000 UZS. Most work on site. We show how to care for the lid: wash the seal after each use, don't store the lid closed so the silicone doesn't deform.

Frequently Asked Questions

Multicooker won't turn on or not heating?

Tell us the model and symptoms — we'll advise on a home visit and prepare for diagnostics.

Call a Master Message on Telegram

Find in your district

Multicooker Repair at Home in Tashkent — in your district

Districts and neighbourhoods of Tashkent. Pick yours — the page with prices, cases and master opens instantly.

55 districts and areas in total