Do you visit Sergeli-5 for multicookers?

Yes. Mid-massiv panel kitchens. We agree the estimate before the module.

Dead keys — replace the board at once?

No. Film first. On Polaris and Moulinex the module follows diagnosis and a quote.

In mid-Sergeli, cool the bowl on the panel balcony or leave it closed on the table?

Leave it closed on the table; the panel balcony adds dust and does not help. Wipe the outside if needed.

How much does multicooker repair at home cost?

Typical jobs start from 100,000 UZS. The exact price depends on the fault and model. Heating element replacement from 150,000 UZS; control board repair from 120,000 UZS.

Can I book a technician for the same day?

Yes, if a slot is available. Share the model and symptoms — we'll estimate arrival time and bring the right tools.

What if the multicooker won't turn on or heat?

Check the outlet and power cord first. If that doesn't help — the control board, heating element, or temperature sensor may be at fault. The technician will check on site and explain the cause.

Multicooker repair at home in Sergeli-5

Home visitDiagnostics with repairWarranty on labor

Multicooker repair in Sergeli-5: a dead keypad or a silent fuse — we check the plate and board after the estimate.

On Polaris and Moulinex in mid-massiv panel kitchens keys stick from riser humidity more often than the heater opens.

Sergeli-5: we seat the pot on the plate by the yard wall — heat contact cannot be tested without it.

from 100,000 UZS

Free diagnostics

Exact price after diagnostics. We agree on the estimate and parts needed before work starts.

Call a Master Message on Telegram

Arrival in 1-2 hours

Warranty included

Home repair

10+ years experience

Sergeli-5

Service Area

Visit time

Confirmed by phone

How to arrange a visit

Name Polaris, Moulinex or Redmond and the fault: keys will not press, no power, pot heats at the rim
Remove the pot in a Sergeli-5 panel kitchen and unplug the cord
Clear the footed base — the socket often sits behind an older cabinet

Call a Master

How the visit works

Panel keypad

Dead keys — film and ribbon before quoting the module.

Mains fuse

Total silence — supply fuse after the cord check.

Pot rim

Rim hot, base cold — pot seat on the plate.

Heat & pressure

Issues We Fix

Heating and sensors

Not heating
Overheating
Display error
Burning smell

Power and controls

Not turning on
Buttons not working
Timer not working

Pressure cookers

Steam escaping from lid
Not holding pressure
Damaged housing

Brands We Service

Topic 1 / 3

Multicooker heating element replacement

If the multicooker turns on but won't heat, or heating is very weak — the heating element has likely failed. The technician removes the bowl, checks element resistance with a multimeter, inspects contacts and the temperature sensor. If needed, we replace the element with a compatible or original part.

Heating element replacement from 150,000 UZS depending on model. Work is done on site in 1–2 hours. We explain why the element failed (scale from water, voltage spike) and how to extend the appliance's life: don't pour cold water into a hot bowl, use a voltage stabilizer.

Multicooker control board repair

Won't turn on, display won't light, buttons don't respond, or an error code appears — the control board is often the cause. The technician checks the power supply, capacitors, processor, and button panel. Individual components (capacitors, resistors) can be soldered on site; a failed processor may need a full board swap.

Board repair from 120,000 UZS; board replacement from 200,000 UZS. We work with Redmond, Polaris, Philips — original and compatible boards. After repair, we test all modes and explain how to avoid a repeat: don't wash the board with water, use a voltage stabilizer.

Pressure valve and lid repair for pressure cookers

Steam escaping from the lid, pressure won't build, or the valve keeps hissing — the lid seal, pressure relief valve, or sensor may be at fault. The technician inspects the silicone seal for cracks and deformation, checks the valve for blockages and spring, and tests the pressure sensor.

Seal replacement from 80,000 UZS; valve from 100,000 UZS; pressure sensor from 120,000 UZS. Most work on site. We show how to care for the lid: wash the seal after each use, don't store the lid closed so the silicone doesn't deform.

Frequently Asked Questions

Multicooker won't turn on or not heating?

Tell us the model and symptoms — we'll advise on a home visit and prepare for diagnostics.

Call a Master Message on Telegram

Find in your district

Multicooker Repair at Home in Tashkent — in your district

Districts and neighbourhoods of Tashkent. Pick yours — the page with prices, cases and master opens instantly.

55 districts and areas in total