Do you repair multicookers with visits by Minor metro?

Yes. The estate by Minor station. Jobs use address and sensor or lid symptom. Plate or sensor price follows continuity tests.

Why does the unit beep when the pot sits flat?

Often the sensor or carbon on the plate. Marta, Hyundai, or Instant pricing comes before module replacement.

Should I leave food in the pot until a pavilion visit?

No — empty and wipe the pot. By Minor metro send the floor and a preferred window from the vestibule.

How much does multicooker repair at home cost?

Typical jobs start from 100,000 UZS. The exact price depends on the fault and model. Heating element replacement from 150,000 UZS; control board repair from 120,000 UZS.

Can I book a technician for the same day?

Yes, if a slot is available. Share the model and symptoms — we'll estimate arrival time and bring the right tools.

What if the multicooker won't turn on or heat?

Check the outlet and power cord first. If that doesn't help — the control board, heating element, or temperature sensor may be at fault. The technician will check on site and explain the cause.

Multicooker repair at home in Minor

Home visitDiagnostics with repairWarranty on labor

Multicooker repair in Minor: a pot sensor that beeps with no pot, a jammed lid, or a burnt smell at the plate — the technician checks the sensor, hinge, and plate.

On Marta and Hyundai by Minor metro we inspect a false pot sensor first, then the lid hinge.

In estate kitchens by the Minor pavilion remove the pot and leave the body by a socket, not on the sill toward the vestibule.

from 100,000 UZS

Free diagnostics

Exact price after diagnostics. We agree on the estimate and parts needed before work starts.

Call a Master Message on Telegram

Arrival in 1-2 hours

Warranty included

Home repair

10+ years experience

Minor

Service Area

Visit time

Confirmed by phone

How to arrange a visit

Name Marta, Hyundai, or Instant and the fault: sensor beeps with no pot, jammed lid, burnt smell at the plate
Set the inner pot beside the Minor-estate socket so the plate can be seen from the vestibule side of the shell
Note the Minor metro exit and estate entrance

Call a Master

How the visit works

Pot sensor

A false signal with no pot is checked at the sensor and contact on Marta or Instant before a board swap.

Lid hinge

A jammed lid is cleared by testing the hinge and lock on Hyundai.

Plate smell

A burnt smell at the plate is traced to carbon and an open coil, not the keys first.

Heat & pressure

Issues We Fix

Heating and sensors

Not heating
Overheating
Display error
Burning smell

Power and controls

Not turning on
Buttons not working
Timer not working

Pressure cookers

Steam escaping from lid
Not holding pressure
Damaged housing

Brands We Service

Topic 1 / 3

Multicooker heating element replacement

If the multicooker turns on but won't heat, or heating is very weak — the heating element has likely failed. The technician removes the bowl, checks element resistance with a multimeter, inspects contacts and the temperature sensor. If needed, we replace the element with a compatible or original part.

Heating element replacement from 150,000 UZS depending on model. Work is done on site in 1–2 hours. We explain why the element failed (scale from water, voltage spike) and how to extend the appliance's life: don't pour cold water into a hot bowl, use a voltage stabilizer.

Multicooker control board repair

Won't turn on, display won't light, buttons don't respond, or an error code appears — the control board is often the cause. The technician checks the power supply, capacitors, processor, and button panel. Individual components (capacitors, resistors) can be soldered on site; a failed processor may need a full board swap.

Board repair from 120,000 UZS; board replacement from 200,000 UZS. We work with Redmond, Polaris, Philips — original and compatible boards. After repair, we test all modes and explain how to avoid a repeat: don't wash the board with water, use a voltage stabilizer.

Pressure valve and lid repair for pressure cookers

Steam escaping from the lid, pressure won't build, or the valve keeps hissing — the lid seal, pressure relief valve, or sensor may be at fault. The technician inspects the silicone seal for cracks and deformation, checks the valve for blockages and spring, and tests the pressure sensor.

Seal replacement from 80,000 UZS; valve from 100,000 UZS; pressure sensor from 120,000 UZS. Most work on site. We show how to care for the lid: wash the seal after each use, don't store the lid closed so the silicone doesn't deform.

Frequently Asked Questions

Multicooker won't turn on or not heating?

Tell us the model and symptoms — we'll advise on a home visit and prepare for diagnostics.

Call a Master Message on Telegram

Find in your district

Multicooker Repair at Home in Tashkent — in your district

Districts and neighbourhoods of Tashkent. Pick yours — the page with prices, cases and master opens instantly.

55 districts and areas in total